15mW CO2 Laser Power Supply Laser Cutting Engraving Marking 35W 50Hz 60Hz
15mW CO2 Laser Power Supply Laser Cutting Engraving Marking 35W 50Hz 60Hz Product Overview This 15mW CO₂ Laser Power Supply is a compact, high-stability driver designed specifically for low-power sealed-tube CO₂ lasers. It is ideal for laboratory experiments, educational demonstrations, optical ...
15mW CO2 Laser Power Supply
,35W CO2 Laser Power Supply
,60Hz laser co2 power supply
This 15mW CO₂ Laser Power Supply is a compact, high-stability driver designed specifically for low-power sealed-tube CO₂ lasers. It is ideal for laboratory experiments, educational demonstrations, optical alignment, and proof-of-concept prototyping. The unit provides precise voltage and current control to maintain a stable 15mW optical output while ensuring safe and reliable operation.
The power supply features short-circuit protection, adjustable current limiting, and forced air cooling, making it suitable for continuous or pulsed operation.
- Precise Power Regulation: Maintains stable 15mW output for consistent beam performance
- Dual Operation Modes: Supports both CW (Continuous Wave) and pulsed operation (0-5kHz)
- Compact Design: Lightweight and small footprint for easy integration into benchtop systems
- Safety Protections: Built-in over-voltage, over-current, and open-circuit protection
- Adjustable Output: Fine-tune the discharge current to match specific laser tube requirements
- User-Friendly Interface: Simple TTL control for laser on/off and external modulation
| Parameter | Value | Condition / Note |
|---|---|---|
| Input | ||
| Supply Voltage | 110 / 220 VAC ±10% | 50/60Hz (selectable) |
| Max Input Power | < 50W | |
| Max Input Current | 0.5A (at 110VAC) | |
| Output (to Laser Tube) | ||
| Output Voltage Range | 10 - 15 kVDC | Typical for 15mW CO₂ tubes |
| Output Current | 3 - 8 mA | Adjustable |
| Max Output Power | ~100W (Electrical) | |
| Efficiency | ≥ 85% | At full load |
| Control & Interface | ||
| Modulation Frequency | 0 - 5 kHz | TTL / PWM input |
| Response Time (Rise/Fall) | < 100 µs | |
| Control Interface | DB-9 / TTL | Laser on/off, current adjust |
| Protection & Environment | ||
| Protections | Over-voltage, Over-current, Open-circuit, Short-circuit | Automatic shutdown |
| Cooling Method | Forced Air Cooling | Built-in fan |
| Operating Temperature | 0°C to +40°C | |
| Storage Temperature | -20°C to +70°C | |
| Relative Humidity | ≤ 90% (non-condensing) | |
| Physical | ||
| Dimensions (L×W×H) | 150 × 100 × 50 mm | Approximate |
| Weight | 0.8 kg | |
| High Voltage Cable Length | 1.0 meter | Included, with connector |
- Scientific research and laboratory experiments
- Educational laser demonstrations
- Optical system alignment
- Low-power material processing (e.g., thin film marking)
- Prototyping for OEM systems
- This power supply is designed for 15mW CO₂ laser tubes (wavelength 10.6µm). Confirm compatibility with your laser head before operation.
- For pulsed operation, use an external TTL signal (0-5V, 0-5kHz).
- Always follow laser safety protocols: CO₂ lasers emit invisible infrared radiation. Use appropriate shielding and laser safety eyewear.
